NZ’s Best Heating Performance in Cold Conditions
If you experience cold temperatures and/or high humidity during the winter months then a HyperCore high wall is perfect for you. The only heat pump guaranteed to produce its fully rated capacity right down to -15 degrees, HyperCore ensures superior heating performance, regardless of outdoor temperatures. As the graph (right) shows, even though both heat pumps are rated to provide 6kW of heat, their performance differs greatly as the temperature drops. While the standard heat pump produces less heat, the FB50 6kW HyperCore High Wall model continues to deliver the full 6kW you paid for. The best low temperature performance heat pump combined with rapid heating ensures warmth when you need it most.
No other heat pump in New Zealand is guaranteed to perform at its peak from +7°C to –15°C. Our HyperCore Heat Pumps will not lower their heating performance even when it is snowing outside. So you can be assured that you will be kept snug throughout winter. HyperCore is also highly recommended for humid and high altitude areas.
HyperCore Heat Pumps are fitted with a ‘heating caulking compressor’ unique to Mitsubishi Electric. The compressor is extremely efficient in its construction and performance. This compressor moves more vapour volume for less energy input and allows the compressor to maintain efficiency and higher revolutions.
When temperatures drop below zero degrees ice will build up on the outdoor unit of any heat pump. How the heat pump reacts to this determines how effective it will be in providing heat to your home. To remove the ice build up the heat pump will need to go into “defrost ” and during this time the heat pump will not be delivering heat into your home. HyperCore’s defrost logic has been fine tuned to extend the period in between defrost periods and optimise its heating performance.
Mitsubishi Electric HyperCore Heat Pumps have an extended heating operation range that allows heating to -25°C. To achieve this the system logic has been changed as well as the addition of a 130 watt base heater and relay card. This heating element prevents ice build up in the outdoor unit following defrost. This element will not operate under most ambient conditions above zero degrees. This ensures the continued delivery of heat to your home by increasing the time between defrost cycles.
With the addition of award winning Mitsubishi Electric Wi-Fi Control, you can control and monitor your heat pump from absolutely anywhere via your smartphone, tablet or online account.
Read more and try a demonstration
Perfect for asthma and allergy sufferers the HyperCore Series are fitted with advanced filtration systems to provide optimal air quality by filtering and deodorising the air. These two functions work together to remove even the tiniest airborne particles and break them down.
Our advanced i-see sensor automatically seeks out temperature differences in the room you need to heat, directing airflow to these areas to bring them up or down to temperature. This prevents excessive heating or cooling and therefore unnecessary operation, ensuring total comfort and reduced energy wastage.
Starting from barely a whisper, our HyperCore Series allows you to feel the warmth, not hear it. The range starts from a hushed 20dBA.
Combining efficient technology with unique energy saving features like Econo Cool – an energy saving function for cooling in summer. Our HyperCore High Wall systems will contribute to reduced energy consumption in your home or office.
A self cleaning ozone shower sterilises and deodorises the indoor unit, ensuring that you get clean, fresh air all year round.